View E65-3F3-E315_4859793.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FERROXCUBE
DATA SHEET
E65/32/27 E cores and accessories
Supersedes data of September 2004 2008 Sep 01
Ferroxcube
E cores and accessories
CORE SETS Effective core parameters SYMBOL (I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.274 79000 147 540 530 205 UNIT mm-1 mm3 mm mm2 mm2 g
R 0.5
handbook, halfpage
E65/32/27
65 +1.5 -1.2 +1.8 44.2 0 0 20 -0.7 +0.8 0 32.8 0 -0.6
22.2
R3
27.4
0 -0.8
CBW073
Dimensions in mm.
Fig.1 E65/32/27 core half. Core halves AL measured in combination with a non-gapped core half, clamping force for AL measurements 60 20 N, unless stated otherwise. GRADE 3C90 AL (nH) 100 5%(1) 160 315 400 5%(1) 5%(1) 8%(1) 250 5%(1) e 22 35 54 68 87 136 1860 1310 1860 2300 22 35 54 68 87 136 1580 TOTAL AIR GAP (m) 14380 7560 4100 3020 2200 1240 0 0 0 0 14380 7560 4100 3020 2200 1240 0 TYPE NUMBER E65/32/27-3C90-E100 E65/32/27-3C90-E160 E65/32/27-3C90-E250 E65/32/27-3C90-E315 E65/32/27-3C90-E400 E65/32/27-3C90-E630 E65/32/27-3C90 E65/32/27-3C92 E65/32/27-3C94 E65/32/27-3C95 E65/32/27-3F3-E100 E65/32/27-3F3-E160 E65/32/27-3F3-E250 E65/32/27-3F3-E315 E65/32/27-3F3-E400 E65/32/27-3F3-E630 E65/32/27-3F3
630 10%(1) 8600 25% 3C92 3C94 3C95 3F3 6000 25% 8600 25% 10600 25% 100 250 315 400 5%(1) 5%(1) 5%(1) 8%(1) 160 5%(1)
630 10%(1) 7300 25% Note
1. Measured in combination with an equal gapped core half. 2008 Sep 01 2
Ferroxcube
E cores and accessories
Core halves of high permeability grades Clamping force for AL measurements, 60 20 N. GRADE 3C11 AL (nH) 16700 25% e 3 620 AIR GAP (m) 0
E65/32/27
TYPE NUMBER E65/32/27-3C11
Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 C 320 370 320 320 320 f = 25 kHz; B = 200 mT; T = 100 C 9.1 - - - - f = 100 kHz; B = 100 mT; T = 100 C 12 8.5 8.5 - 10.5 CORE LOSS (W) at f = 100 kHz; B = 200 mT; T = 25 C - - - 49.8 - f = 100 kHz; B = 200 mT; T = 100 C - 47 47 47.4 - f = 400 kHz; B = 50 mT; T = 100 C - - - - 21
3C90 3C92 3C94 3C95 3F3
2008 Sep 01
3
Ferroxcube
E cores and accessories
COIL FORMER General data for E65/32/27 coil former without pins PARAMETER Coil former material Maximum operating temperature SPECIFICATION
E65/32/27
polyethylene terephtalate (PET), glass reinforced, flame retardant in accordance with "UL 94V-0" ; UL file number E107536 130 C, "IEC 60 085", class B
handbook, full pagewidth
3 0.1 (6x) 2 0.1
5 0.1
23 0.1
0 0 53 27.7 +0.2 30 -0.2 -0.3 0
1.2 0.1 20.6 +0.2 0 23.5 0.2 44 0 -0.3
Dimensions in mm.
39.2 min. 42 0.2 46 0.2
CBW074
Fig.2 E65/32/27 coil former. Winding data and area product for E65/32/27 coil former without pins (E) NUMBER OF SECTIONS 1 MINIMUM WINDING AREA (mm2) 394 NOMINAL WINDING WIDTH (mm) 39.2 AVERAGE LENGTH OF TURN (mm) 150 AREA PRODUCT Ae x Aw (mm4) 213000
TYPE NUMBER
CP-E65-1S-T
2008 Sep 01
4
Ferroxcube
E cores and accessories
MOUNTING PARTS General data for mounting parts ITEM Clasp Spring steel, zinc (Zn) plated steel, zinc (Zn) plated REMARKS FIGURE 3 4
E65/32/27
TYPE NUMBER CLA-E65/32/27 SPR-E65/32/27
58.42 0.2 14 2.8 7
42.8
14
30 0.3
27
35.56 0.2
4 11 0.9 52
MFW048
0.6 68.5 0.3 5
76 0.4
Dimensions in mm.
Fig.3 E65/32/27 clasp.
7 1 0.8 min
27.5 0.2
70.5 0.2
55 0.5
66.1 0.2
MFW049
4 0.3
Dimensions in mm.
Fig.4 E65/32/27 spring.
2008 Sep 01
5
Ferroxcube
E cores and accessories
DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS
E65/32/27
This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product.
Production
DISCLAIMER Life support applications These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability.
2008 Sep 01
6

▲Up To Search▲

Price & Availability of E65-3F3-E315

	To Download E65-3F3-E315 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .